Common Canon MP Series Printer Error Messages

Common Canon MP Series Printer Error Messages

• P02 (Carriage error)
• P03 (Line feed error)
• P05 (ASF sensor error)
• P06 (Internal temperature error)
• P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full.
• P08 (Print head temperature rise error)
• P09 (EEPROM error): – The logic board need to be replaced for this one.
• P15 (USB VBUS over current)
• P20 (Other hardware error
• P22 (Scanner error)
• E13 or E16: Ink has run out. Press the Stop / Reset button for 5 to 8 seconds until the led screen display number 1.
• E04, E05, E14 or E15: Cartridge may not be installed properly. Reinstall the ink cartridge.
• E2-2 = No paper (ASF)
• E3-3 = Paper jam
• E4 = No ink
• E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
• E8 = Waste ink absorber full, or platen waste ink absorber full
• E9 = The connected digital camera / video camera does not support Camera Direct Printing
• E14 = The Ink cartridges whose destination are wrong
• E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
• E16-E19 = Failed to scan head alignment sheet
• E22 = Carriage error
• E23 = Paper feed error
• E24 = Purge unit error
• E25 = ASF(cam) sensor error
• E26 = Internal temperature rise error
• E27 = Waste ink absorber full or platen waste ink absorber full
• E28 = Ink cartridge temperature rise error -
• E29 = EEPROM error
• E33 = Paper feed position error
• E35 15 = USB Host VBUD overcurrent error – USB
• E37 17 = Abnormal motor driver error
• E40 20 = Other hardware error
• E42 22 = Scanner error

you read the article in category With the title Common Canon MP Series Printer Error Messages. You can bookmark this page with URL https://manualreset.blogspot.com/2014/10/common-canon-mp-series-printer-error.html.

Writen By: Unknown - Friday, October 17, 2014