The following test procedure shall check if the scanner is working correctly with your computer and the software to scan. Before the test for your scanner, double check to make sure that all connections are properly closed.Troubleshooting software installation Carefully review the steps in this guide and quick guide to installing, accompanying your scanner. If you still have problems, please make sure that: You have 250 MB of free hard disk space. Scanner is turned on and has power. you use the USB cable to the scanner. Square end of the USB cable is plugged into the rear of the scanner. Rectangular end of the USB cable is plugged into the back of your computer.
If you deviate from the installation procedures defined in this guide, please remove the USB cable from the scanner and reinstall from the CD-ROM. to reinstall your scanner software, click Start, click Run, and then type D:Install (where d represents the drive letter of your CD-ROM drive). Carefully follow the installation instructions provided in the installation wizard. Restart your computer when prompted, and Plug the USB cable back into the scanner, while your computer is still on.Scan and edit images
The following describes how you can use our batch edit images annex new soft Presto! Picture of the film to perform your first scan. When you are familiar with the scan, you can alternatively use other compatible scanning program SUPPORTS TWAIN or application for editing images to make scanning projects.
Calibrating the scanner Calibrate the scanner, if the colors appear in areas that should be white, or color of a scanned image and the original differ a lot. This allows you to adjust and to compensate for variations that can occur in the time of the optical element in nature
.png)
.jpg)
There no comment for "Genius color page SF600 s manual scanner"
Post a Comment